Trend PH/JIG/BK 3-In-1 Pocket Hole Jig - Kit with Screws and Carry Case

Trend Drilling Accessories
3 in 1 POCKET HOLE JIG
Ref: PH/JIG/BK

Multi-function jig for drilling 9.5mm pocket hole joints suited to both new and repair work. Lightweight glass-fibre reinforced nylon construction with full-length, hardened drill guide bushes. Unique drill depth setting system for fast set-up on materials from 12.7 to 38mm. Adjustable centres are ideal for narrow and wide stock, and detachable drill guides are perfect for narrow repairs in confined spaces.

• Material Thickness Gauge allows fast checking of material thickness without the use of a tape measure.
• Pre-set Depth Gauge adjusts the pocket position to suit the timber thickness.
• Drill Bit Setting Gauge is used to set the correct drilling position for materials between 12.7mm and 38mm thick.
• Full-Length Hardened Drill Guide Bushes for long life and accurate drilling.
• Repositionable Drilling Guides allow the hole centres to be altered between 28mm and 50mm ensuring stronger joints in wider material.
• Woodchip Relief Holes help protect against clogging inside the drilling guides.
• Flip-Over End Stop allows the jig to hook over for an external joint or butt up to an edge for an internal joint.
• Pocket Hole Guides can be removed and used as single pocket hole jigs for narrow stock or repairs.
• Magnetic Clamp Position allows a face clamp to attach to the jig for easier repositioning.
• Centering Plate Index for setting the drill guides to pre-set positions.
• Glass Fibre Reinforced Nylon Body minimises weight whilst retaining strength.

• 50 x Assorted Screws 
• 1 x HSS drill bit with collar
• 1 x 150mm Square drive bit
• 1 x Adapter plate
• 1 x Hex key 3mm A/F
• 1 x Carry case

• Simple slide adjustment for 28mm – 50mm centres.
• Built in depth gauge for fast drill depth setting.
• The jig hooks over the end of the material for accurate positioning on new work.
• The small plate slides in for single hole applications to allow it to be clamped to the work.
• Easy to locate in situ for repair work.
• Fast, strong and quick construction for impressive projects.

• Material thickness min:12.7 mm
• Material thickness max: 38 mm
• Hole pitch: 28 to 50 mm
• Drilling angle 15 degrees

Trend PH/JIG/BK Manual

Trend Pocket Hole Jig Size Guide