Trend LOCK/JIG/B Trade lock jig for router c/w Trend cutter and corner chisel

Trend Fully Adjustable Trade Lock Jig Package
LOCK/JIG/B complete with Trend C172x1/2TC Cutter & Trend Corner Chisel

Trade jig with adjustable sliding inserts to allow faceplate and mortise recesses for popular size door locks to be routed with a plunge router.
Complete with Trend C172 x 1/2 TC lock jig router cutter 63mm long x 12mm diameter and Trend C/Chisel corner chisel

• Fully adjustable for lock face plate length up to 250mm.
• Quick and easy to set up using engraved lines for lock size and door sizes.
• Fast, clean & accurate results on doors even in hardwood.
• Engraved for 16mm and 19mm lock width and 22.5mm and 25.4mm face plate widths.
• Measuring required for other lock widths.
• Engraved on underside to allow set up for 35mm, 40mm, 44mm and 54mm door widths.
• Deeper mortises can be achieved with a suitable size of auger bit.
• Plastic laminate body with aluminium clamping bar, with clamping range 30mm to 80mm.
• Includes a pair of setting blocks for specific lock widths and to aid door centring.
• The jig requires a 1/2-inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 10mm spigot, 12mm diameter long reach cutter and two quick action clamps. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
• Includes C172x1/2TC lock jig cutter

115mm overall length. For up to 70mm deep mortise dependant on plunge of router and use of Unibase etc.

70mm overall length. For mortise, deepening of mortise with auger bit required.

Optional Accessories: (not included)

Find a fully in depth step-by-step guide to using an adjustable lock jig here in our Knowledge Centre.