Charnwood MAG100 Magnetic Hose Connector For 100mm Diameter Hose

Charnwood MAG100 Magnetic Hose Connector For 100mm Diameter Hose

• Magnetic hose connector for use with 100mm (4″) internal diameter extractor hose.
• Part of our magnetic hose system. When paired with the Magnetic Cuff it allows a dust extractor hose to be instantly installed or removed.
• Made from rigid plastic with a tapered collar ready to attach a hose on one end. On the other end is a ring of 8 magnets which form an instant air tight seal with the cuff.
• When used as a pair, a hose can be instantly installed or removed completely. It gives a practical option of using a single hose and switching between different machines as required, rather than installing a permanent branch system.
• It is a massive benefit to smaller workshops where hoses left running across the floor represent an annoyance or maybe even a trip hazard. Using magnets on both ends of the hose allows the complete hose to be removed and hung on a wall.
• It also allows a workshop to have 2 different lengths of hose ready to use in an instant. For example a 2.0m hose for a bandsaw which is situated close to the extractor, then swap it out for a 4.0m hose running to the table saw.
• Requires a 100mm hose clamp to secure the hose

• Internal Diameter For Hose: 100mm (4")
• Size (WxDxH): 60mm x 135mm x 135mm
• Weight: 100g

Knowledge Centre - Buyers Guide to Dust Extraction