Charnwood 75/50RC Reducing Cone 75mm to 50mm

Charnwood 75/50RC
Hose Reducer 75mm to 50mm (3" to 2")

Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.

It is recommended that 100mm diameter hose is always used from the extractor to the dust producing machine and then the reducing cone fitted. Using any length of hose of less than 100mm diameter will reduce the performance of the extractor and should therefore be kept to a minimum. A hose clamp should be used to fasten the hose the reducer.
 

• Large End - outside diameter of 75mm - inside diameter of 69mm
• Small End - outside diameter of 50mm - inside diameter of 44mm

Knowledge Centre - Buyers Guide to Dust Extraction

Dust Extraction Reducers Sizing Chart